The wireless fire alarm system makes installation easy and fast, even for non professionals, and saves a lot of money and time.
Wireless fire alarm and firefighting systems can be applied to sports venues, hospitals, office buildings, production workshops, public buildings, etc. The communication distance between the wireless fire alarm host and various wireless fire detectors is 700 meters, but by adding wireless repeaters, the maximum distance can reach 4000 meters.
Wireless fire alarm and fire fighting linkage
There are wireless smoke detectors, wireless heat sensors, wireless manual alarms, wireless fire hydrants, wireless combustible gas detectors, wireless electrical fire and electrical fire monitoring detectors, as well as transformers and temperature sensors
There are also input modules, input-output modules, and sound and light alarms.
The wireless fire alarm controller is the center of alarm and fire linkage. The controller panel has LED display screen, buttons, indicator lights, printer, dedicated control panel, and bus control panel.
The wireless fire alarm controller has a dedicated line to directly start large interconnected equipment such as fire pumps and sprinkler pumps.
It adopts a three wire system, directly connecting three wires to the wireless fire controller. There are 6 sets of direct start controls.
The bus control panel has a total of 18 bus points, which can remotely control wireless input/output modules and wireless sound and light alarms.
The wireless fire controller can have up to two circuits with 128 points for connecting wireless smoke detectors, wireless gas detectors, wireless sound and light, wireless manual alarms, etc.
When a fire alarm is triggered, the fire alarm is output, and at the same time, DC 24V is output to start the fire broadcast and other output control equipment.
The wireless fire alarm controller also has CAN bus output, which is used to connect the centralized fire control controller in the center to transmit alarm information and further transmit it to the alarm platform, etc. And the 485 bus output is used to connect alarm display screens such as CRT.
The wireless fire controller is powered by AC and has two 12V 3.3Ahh lead-acid backup batteries.
